Product ID:1751A ALUMINUM EPOXY ADHESIVE
MSDS Date:10/22/1990
FSC:8040
NIIN:00-181-7548
Kit Part:Y
MSDS Number: BPTWM

3/M COMPANY

3M CENTER
ST. PAUL, MN 55144
US

Emergency Phone: 612-733-1110

Info Phone: 612-864-2310

Preparer: C.A. EISENHARD

Cage: 76381

MINNESOTA MINING AND MFG CO, DBA 3M

SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

POLYAMIDE RESIN

CAS: 68410-23-1

Fraction By Weight: 70-80%

TRIETHYLENE TETRAMINE

CAS: 112-24-3

RTECS: YE6650000

Fraction By Weight: 5-15%

CLAY

CAS: 68953-58-2

RTECS: GF1670500

Fraction By Weight: 1-10%

SILICA, AMORPHOUS HYDRATED (PIGMENT)

CAS: 7631-86-9

RTECS: VV7322000

Fraction By Weight: 1-10%

ACGIH TLV: 3 MG/M3; 6 MG/M3 TWA

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:EYES: DIRECT CONTACT COULD PRODUCE SEVERE
IRRITATION. SKIN: CONTACT WITH SKIN MAY PRODUCE MODERATE
IRRITATION. MAY CAUSE SENSITIZATION IN CERTAIN SUSCEPTIBLE
INDIVIDUALS. INHALE: MAY BE IRRITATING TO NOSE AND THROAT. INGEST:
MAY CAUSE DIGESTIVE SYSTEM IRRITATION.

First Aid:EYE: FLUSH WITH PLENTY OF WATER FOR 10 MINUTES, CALL A
PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. INHALATION: REMOVE
INDIVIDUAL TO FRESH AIR. CALL A PHYSICIAN. INGEST: DO NOT INDUCE
VOMITING. IMMEDIAT ELY CALL A PHYSICIAN OR POISON CONTROL CENTER.

Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICALS
Fire Fighting Procedures:FIRE FIGHTERS SHOULD BE EQUIPPED WITH SELF-
CONTAINED BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING THIS
MATERIAL.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:VENTILATE AREA. COLLECT SPILLED MATERIALS.
PLACE IN US DEPT OF TRANSPORTATION APPROVED METAL CONTAINER, SEAL.

Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:USE ONLY WITH SUFFICIENT VENTILATION TO MAINTAIN
VAPOR CONCENTRATIONS BELOW RECOMMENDED EXPOSURE LIMITS. AVOID
BREATHING VAPORS RELEASED DURING HEAT OR CURING.
Ventilation:CURING EQUIPMENT SHOULD BE VENTED TO THE OUTDOORS OR
SUITABLE EMISSION CONTROL DEVICE.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GLASSES/CHEMICAL GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING AS NECESSARY TO PREVENT
SKIN CONTACT.
Work Hygienic Practices:WASH CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
FOR INDUSTRIAL USE ONLY. THIS MATERIAL IS PART OF A TWO COMPONENT
SYSTEM. THE PRECAUTIONS FOR EACH COMPONENT SHOULD BE OBSERVED WHEN
SEPARATE OR MIXED.

HCC:B2
Spec Gravity:0.950 (WATER=1)
Solubility in Water:NIL
Appearance and Odor:AMBER PASTE, AMINE ODOR.

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:THERMAL DECOMPOSITION OR BURNING MAY
PRODUCE CARBON MONOXIDE, CARBON DIOXIDE, NITROGEN, HCN.

Waste Disposal Methods:MIX PART A W/PART B. COMPLETELY CURE/DISPOSE OF
FULLY CURED WASTE PRODUCT IN SANITARY LANDFILL. INCINERATE UNCURED
BULK PRODUCT AFTER MIXING W/FLAMMABLE MATERIAL IN
INDUSTRIAL/COMMERCIAL FACILITY. DIS POSAL IN ACCORDANCE WITH
APPLICABLE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.